Quote:
Originally Posted by Brunoz28
I changed the pin for the reverse switch. I will try the test procedure you outlined if it doesn't work I think I'll be ordering a new switch soon.
|
I checked the 14 pin connector as recommended. There was no power on 5 & 6 on the female side; the male side only had power on 5 nothing on 6. I tried to bridge 5 male and 5 female assuming at least one side's reverse lamp would work. It did not.
I checked the fuse for the green and yellow wires there is a thicker one that only comes on when the headlamps are on. The thinner green and yellow wire has power with the ignition on.