|
5 to 6 all on the male side worked like a charm. LIGHTS CAME ON! Is there something that could be keeping the current from getting through? Even when the green/yellow is not connected to the switch the test lamp still does not go on. To me this rules out the switch and indicates that something is keeping the current from arriving at the opposite end of the green/yellow wire therefore never getting to the brown/gray or the lights. Is that right? I have no clue where to go from here and I assume my conclusion is probably wrong. What's next?
Last edited by Brunoz28; 09-02-2014 at 07:53 PM..
|