View Single Post
Peter Graham Peter Graham is offline
Registered
 
Join Date: Sep 2008
Location: Black Mountain, NC
Posts: 470
Garage
Quote:
Originally Posted by Kaizer View Post
Vented or solid? Cross-drilled or not?

Then which pads?

Also putting together a "roadside" kit of extra parts as things fail on the 912:
  • gen pulley
  • gen nut
  • gen belt
  • extra shims
  • accelerator link
  • duct tape
  • anything I am missing?
Choices for rotors are solid unless you want to do a lot of work to fit different calipers (another thread's worth of discussion). Pads: your choice; I like Ferrodo and keep Textar in stock.

My 'in the car' list (in the car all the time)
  • Oil (Valvoline VR-1 20W-50, 2 qts)
  • Generator pulley (both halves, hub, extra shims)
  • Generator Belt
  • Ignition tune-up (points, condensor, rotor, cap, spark plugs)
  • Electrical tape, 25' 14 gauge 2-wire speaker wire, electrical crimp connectors
  • Fuel line, clamps (3', x4 clamps)
  • assortment screws, bolts ,washers, nuts
  • assortment fuses
  • safety wire, nylon wire ties (you could have patched your accel link with either)
  • Valve cover gaskets (2)
  • Nitrile gloves
  • Rain gear (old golf jacket, pants)
  • Tools (good cheap selection from home improvement store)
  • Tire gauge
  • old golf towel, roll of paper towels (in ziplock bag), duct tape (in ziplock)
  • 12' nylon web strap (for emergency towing, pulling; in ziplock)
  • LED flashlight
  • Reading glasses (cheap drugstore type)

For long trips:
  • Oil, 4 additional qts
  • First aid kit
  • complete ignition system (coil, distributor, hi-tension wires)
  • Complete rocker shaft assembly
  • Generator regulator
  • Fuel Pump
  • Sealants, aerosol brake cleaner, Loctite blue hi-temp
  • Grease gun (for ER poly bronze suspension bushings)
  • Small bottle brake fluid
  • 1 qt transaxle grease
  • Rain-X window cleaner
  • Large torque wrench with soft socket for alloy lug nuts
  • Valve adjustment specialty tools (Stubby screwdriver, handled 0.004/0.006 feeler gauges, 13mm long combo wrench)
  • 1/2" drive ratchet with 1/2 to 3/4 adapter, 36mm socket for gen pulley nut
  • Timing gun
  • Dwell/RPM/Electrical meter
  • Carb sync tool (Motometer or equivalent: what ever works best on your carb type)
  • Large 5 mil trash bags (2)
  • Energy bars, gum, bottles of water

There are probably things I've forgotten; I would have to go through the travel bags... Here's a photo of what it looks like (before 1st cross-country trip), minus the case of wine. of course.



Peter

Last edited by Peter Graham; 09-04-2014 at 02:10 PM..
Old 09-04-2014, 02:02 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #41 (permalink)