|
Im sure it will work for you. I dont have any experience with Tweco but from what I have goggled they seem to be owned by Victor. Not sure how the parts or tech support is with them. What is the amperage on the machine min max? If you can get this for under $800-900 then it might be worth a look since you cant buy 2 new machines for that price. 2 or 3 in 1 machines tend to be mediocre at best when compared to single set up machines. For a hobbyist or starting out it works ... Im sure if you continue youll be upgrading later down the road. I have a 210amp millermatic which works very well for sheet metal to 3/8" no problem. The min turn down for this machine is about 30amps. I would see if they have a 90 day return policy and give it a try ... you really have nothing to lose. I would put it threw the paces and have some others (friends or local guys) who know how to weld give it a try then ask there advice. Also look on craigslist ... there are a ton of deals to be had for very nice used units.
|