|
Member 911 Anonymous
Join Date: Sep 2007
Location: Rancho Palos Verdes
Posts: 14,329
|
Not that difficult at all, but requires at least 2-3 hours.
Check out the PAG diagram, there are 2 U joints, 1 Needle bearing under the donut bushing. My tutorial also has some details. Remember no need to remove the sway bar, it is a biotch to replace. when car is raised.
__________________
'85 Carrera Targa
Factory Marble Grey/Black * Turbo Tail * 930 Steering Wheel* Sport Seats * 17" Fuchs (r) * 3.4 * 964 Cams * 915 * LSD * Factory SS * Turbo Tie Rods * Bilsteins * Euro Pre-Muff * SW Chip on 4K DME * NGK * Sienes GSK * Targa Body Brace
PCA/POC
|