|
The seals will need replaced when doing the OPV anyway. You probably have the 3 piece valve. Get the updated 1 pc valve to replace the one you have. The seals are already updated in the kit. Use tool 9215 OPV alignment guide to install the OPV. This can be done with out the tool however if it isn't in correctly it will cause poor pressure readings. May as well get a new oil sender as well. It mounts right on the cooler housing and are famous for leaking etc. Flush out the system well to rid the coolant of any residual oil. Oil in the coolant destroys the hoses over time. Sman
__________________
PCA " I've been everywhere, done everything......just can't remember any of it!" 
|