|
Clutch, AOS, flywheel and IMS bearing replaced, but now won't start!
Hi All,
I'm new here having just bought my first Porsche. Last week I decide to remove the gearbox to do some preventative work. This included replacement of the worn flywheel and clutch, together with IMS bearing, AOS and RMS replacement.
Having put everything back together, I unplugged the DME to crank over and allow oil pressure to build. With the harness disconnected, it wouldn't even crank, so I plugged it back in and tried the methods of briefly starting and shutting off. The battery was near flat. It did turn the car over and it started for a second at which point I shut off. Since then the car will not start.
I've charged the battery and checked the fuses. I can smell petrol when I it turn over which suggests the relay and pump are fine. Does it not also suggest the CPS is okay? There is no hint of it firing at all. Any suggestions?
Thank you.
Alan
|