[qdac]

I used paper sleeves cut from a 4x6 note card when inserting the cam carrier bolts on my US 81. This made the insertion of those bolts trivial.
In addition, I cut down a long 6mm hex key and epoxied it into a 6mm 1/4" socket to make a long hex key socket that was just the right length so that I could properly torque all of the cap bolts.
Removing both power steering hoses helped clearances quite a bit.
Note, however, that I only did the US driver's side (left side of car, distributor side) and I quake in fear of having to do the passenger side.