Quote:
Originally Posted by Devil Dog Mosport
Up Front,
Stayed with the 23mm TBs - stiffened up the Sway just a bit. Put in quick adjust ER Camber plates. Reset alignment - Toe at 1/4' per side, -2.0 camber each side - Raybestos ST43 pads
In Back,
Stayed with 33mm TBs - softened up Sway bar quite a bit, Lowered to 24.0 inches, Reset alignment -2.5 camber each side, slight toe in, Raybestos ST43 pads.
|
1/4 toe IN? or OUT? Either way that's a LOT... Not to say I haven't done it before, but 3/16" was usually the max I would go. What would you estimate at the rear?