Quote:
Originally Posted by flash968
cool - it's just odd that they don't mention that, as it is something that is painfully lacking in other shocks, and would be a key selling point.
is the top bushing a spherical bearing?
|
Yes, spherical top and bottom.
Quote:
Originally Posted by Litesonic
9FF are you with or without TBs?
If with, are you getting unseating at all. It looks like you are 2 in lower on the perch than I am.
I have ordered a set of tenders and a collar to combat this. As I think if I go as low as you my rear ride height will be 2 inches higher. I am currently at 25.25"
|
Yes, no tb's and adjusted only 1in lower than stock. I did fit a helper spring and spacer after that picture was taken to avoid the spring unseating both on the front and rear GC Kit. It's not a tender spring as such it's just a helper and has negligible spring rate, just enough to hold the spring in place. Here's the front with them fitted.
