|
Had / have same problem Erik. Kept replacing fuses. Sometimes switch (always driver's) would go and I'd replace it. About 2 years ago I replaced door and so swapped out all parts. Rebuilt window motor, lube gears... all that. When rebuilding door I insulated old wires near switch as insulation was eaten up --- car is '80 with original door wiring. Problem disappeared since then... now it's back. Fuse this time is good and motor should be good so am suspecting 'cheap' switch is gone once again. Planning to test it today. Will take pics of process and post info later.
__________________
Karl ~~~
Current: '80 Silver Targa w /'85 3.2. 964 cams, SSI, Dansk 2 in 1 out muf, custom fuel feed with spin on filter
Prior: '77 Copper 924. '73 Black 914. '74 White Carrera. '79 Silver, Black, Anthracite 930s.
|