Way to much $ quoted my local mechanic, so I tackled it my self.
Purchased BC Coil Overs & 23 MM wheel spacers w/longer lugs from Amazon (free shipping thanks to wife's Amazon prime account)
Installed them myself in one day (would have been shorter, but had to run to Lowe's twice for tools and local metal shop for bolts.
Front: Remove 4 nuts up under wheel well at top of strut.
Remove bottom bolt holding original strut (I had to cut mine off, too corroded)
Remove one of the bolts on torsion bar.
Remove ball joint bolt.
Lower strut off of 4 top bolts, tilt toward you and pull out.
Install BC Coil Over and replace bolts and nuts.
Add 23 MM wheel spacer and that's it for the front.
Back: Remove 4 bolts up under wheel well at top of strut (hard to get to)
Remove bolt at bottom of strut (I had to cut mine off, too corroded like front was)
Take out and then remove brace at top of strut (you will see what I mean when it comes off)
Install BC Coil Over onto brace and reinstall up under wheel well.
Replace bolts.
Add 23 MM spacer and you are done.
