[pete13]

okay: passenger side window wasn't working, so i figured it was the passenger window switch on the driver side. The female end of a red/green wire was broken. So, i soldered on a make-do piece, and when i went to connect it again, i was somewhat confused by pelican's wiring diagram, which mentioned a red wire, but no red/green. I assumed that the red/green was the same as the red in the diagram, put it together, and tried the window. It only worked going down. I'm certain it's not the motor, because I took it out and cleaned it and it's been working flawlessly. Is my soldered connection bad, or are the wires in the wrong place??