Quote:
Originally Posted by David Goodman
Although it might be the coolant fitting problem, given the volume of coolant I would suspect something else.
Most people experiencing the fitting problem have a catastrophic failure - meaning the entire fitting is jettisoned from the housing dumping a large volume of coolant.
I would start with some dye in the coolant, and a pressure tester. Disassemble the overhead intake and piping until you can actually see the leak. You might be surprised to find it is something simple.
|
Thanks for your reply David! This leak is a very small amount...maybe a drop or two per day, so not that sizeable. In fact it's gone from the high mark to the low mark on the expansion tank in about 1 month.
What needs to be removed to gain access to the possible problem area? (You mention the overhead intake and piping.)
Thanks again!