Quote:
Originally Posted by Mark Wilson
Building up a stripped lower is slightly tedious but it's a cool process and enjoyable. You'll probably want a few inexpensive tools to make it easier - roll pin punch set, roll pin starter set, mag block to hold lower steady in your vice. When you order your lower parts kit, order a couple extra takedown pin keepers and springs. There is a good chance you'll lose one or two of those little bastages. Good luck!
|
If you use one of these
1/4 in. x 2 in. Zinc-Plated Universal Clevis Pin-88008 at The Home Depot You will not loose the spring. Line up the hole in the clevis with the spring, insert spring, turn clevis, slide in the take down pin. Easy peasy
Dave