|
First, definitely not an expert on SO.
That being said, when we picked ours up we didn't realize it was SO until we pulled out the lower slide out cover for the larger bottom opening of the box. The door had been jammed/wedged open.
The face of the door is embossed with the SO logo. I could see it was the earlier version. This lead to more research and the discovery of the date/model number stamped into the bottom edge of the carcass of the cabinet.
I forget now if it was R or L front above where casters bolt on.
The top edge of the cabinet has two holes where the SO badge would have been.
I searched off and on for a couple years to try and find the correct badge...no luck and lost interest.
The box is definitely robust, but old school basic. Welded on simple flat metal drawer pulls and old fashioned metal slides. No roller bearings.
Works great in the garage and goes well with Dad's '56 Corvette and '57 Belair Hardtop.
C
|