|
all of the above.
When I removed an "assembly", I placed each bit of hardware in it's respective position and took digital pic before tagging, bagging, and storing. Then when getting the hardware/parts back from plating/powder-coating process, I went back through my pics to match everything back in it's proper position.
This worked for about 98% of the project.....the other 2% I would have lost anyways. ;o)
Label any disconnected wiring with durable tape and a Sharpie....unlabeled wiring during the re-assembly process is a real time-killer. Taking pics of the electrical bits was very helpful as well.
|