|
Registered
Join Date: Jun 2014
Location: Lake County, FL
Posts: 820
|
Block off plate is a dead giveaway for sure.
BUY A FLYWHEEL LOCK! Setting and locking your engine at TDC is crucial. Also, the six 10mm bolts that hold the radiator fans in place are easier to remove than getting all of your rollers torqued properly with the fans installed.
Replace the rollers while you are in there too, any job worth doing is worth doing right and these are definite wear items. Its not worth putting new belts and a new pump and tensioning it up properly with junk rollers, gambling on $100 worth of rollers/tensioners against a $2000 valve job is pretty silly. Seals are up to you, easy to do while you are in there now...
|