have to answer this post for two Reasons
First if it helps you i don't know but i was having starting issues and gremlins,
I dont remember where i got this mod but it def helped my starting and rough idling
drill holes in the distributer cap, about 1/8 of an inch in diameter, evenly spaced.
IT mostly helps with relieving cap of any condensation thereby keeping innards dry and better to spark. in case its an issue with yours its worth a shot ,
If you do it, drill slowly as to not crack it, , also dont drill too low either, i cant remember why i drilled it this particular way but there was a good reason and i remember trying different ways,
This was what i ended up with and shes been starting on half a crank ever since
Aaannnnd secondly
This is my 1000th Post WOOHOO !!
