|
Platinum Member
Join Date: Jul 2001
Location: Leave the gun. Take the cannoli.
Posts: 21,299
|
I'd clean it with an aggressive cleaner, like paint thinner or alcohol to make sure all grease is off. Then sand(rub) them with 3M scotch brite pads.
Good primer, and paint. Harbor freight HVLP guns are not bad, I have used it for rollcage and some auto paint, but your compressor won't have the volume.
I also have had good results with a Campbell Hausfield HVLP setup, sells for around $200 at home depot (no compressor needed, supplies it's own air).
|