|
Actually the fasteners and frame are not the problem. They are decent and when assembling I put s little tonnage on the press before tightening the bolts and everything went together real square and tight. The issue is that sled that comes down when you pump it. There is so much slop in that (1.5-2" sideways slop) piece that when you finally touch what you want to press and pump it up a little, the sled flings to one side to eliminate the huge tolerance and get rigid for pressing. Now everything has shifted if you're lucky enough to have the piece not dislodge and hit you. Never again. I can make one for probably $200-300 and it will be durable. The Chinese stuff is at a comedically crappy level.
|