|
I finally figured out how to program the door opener on my 2009 CS. It was a two step process. First, I had to teach the transmitter in the car the frequency of the door opener by simultaneously pressing the button on the remote that came with the opener and the button in the car that I wanted to program. I had to get the remote fairly close to the button I was programming to get it to recognize it. It confirmed that it learned it by changing from blinking slowly to blinking fast. These are the procedure steps in the Porsche Owner's manual.
The next step, which wasn't in the manual, was to get the door opener to recognize the car transmitter. To do this, I followed the garage door opener manual to "teach" a remote. I have a Liftmaster jackshaft opener, so I pressed the the "program" button on the side of the master controller, then pressed the button in the car I wanted programmed.
This worked with my setup; hope it helps someone else and saves them the time it took me to figure out how to do it!
|