Quote:
Originally Posted by T77911S
connect the sending unit back up to the gauge and turn the sender up and down to make the float go from one end to the other and check the gauge.
the float can get stuck with it installed but turning it upside down may make it work.
|
Yes, I did that. See post #10
http://forums.pelicanparts.com/porsche-911-technical-forum/845177-gas-gauge-doesnt-go-below-1-2-fuel-sender-does-not-appear-stuck.html
In that thread, we have already determined the sender is not broken.
When the sender is removed and bottomed out, it reads 67 ohms, which is supposedly correct.
When connected, at 67 ohms, the gauge shows 1/2. This proves it's the gauge, and not the sender.
So, the sender is doing sending what it's supposed to. Sending 67ohms at E.
Looking for info on how to repair the gas gauge.