|
Registered
Join Date: Jan 2009
Location: Marietta, Ga (Atlanta)
Posts: 2,970
|
Quote:
Originally Posted by Porsche84
Well uwanna is partially correct. The 86 930 flanges are the same as the 85.5-86 Carerra flanges. The earlier 930 flanges also had a hole in the spline end to go over a boss in the diff and I am not sure if the length was the same.
|
You are correct Jerry, I forgot about the '86 Turbo being the same. When I put a 964 3.6
in my '80SC I searched for the '85.5-86 108mm flanges with no luck, so I found a set of earlier 108mm fine spline 930 flanges. Problem with them is they won't fit over the CV joint "tin caps". They are however the same length on the spline shaft and will bolt right up. I later luckily found a correct set of the '85.5-86 flanges, and all is good now!
__________________
'80SC Widebody 3.6 transplant Anthracite "The Rocket"
Long gone but still miss them all:
'77 911 Targa, '72 BMW 3.0CS Coupe(finest car I ever had!)
'71 911T Coupe White, '70 911T Coupe Blue
'68 911 Coupe Orange, '68 911L Soft Window Targa
|