|
Sorry Jeff, but the compressor cylinders get hot as a MF pretty quick. The cylinder exit is usually through a section of the head with a large heat sink with fins.
And SM: definitely have to worry about water drop out as the air cools along the lines, etc. For a football, we're not compressing the air as much as an air tool. And dewpoint is not linear with pressure: see the steam tables, they are the same.
And this is the reason you should check pressure levels on tires after getting them installed. As the air cools down, it will reduce the pressure.
__________________
James
The pessimist complains about the wind; the optimist expects it to change; the engineer adjusts the sails.- William Arthur Ward (1921-1994)
Red-beard for President, 2020
|