Thanks David. I do like the way they turned out.
Tonight, I rebuilt the pedal cluster.
Gathered all parts...
Installed the new bronze bushings...
Position the brake pedal in the bracket...
Slide in the outer tube the brake pedal rotates on (don't bolt it on yet)...
Slide in the shaft for the clutch pedal (don't forget the nylon spacer)...
On goes the clutch pedal, with a new roll pin to hold it in place...
Install the clutch pedal spring, then the bolt for the brake pedal shaft/tube...
And finally, the accelerator gadget...
Annnnd done!!
That was a lot easier than I thought.
