Quote:
Originally Posted by matt f
Roll pins are wedge shaped.
Only come out one way.
Make sure you are punching the pin in the appropriate direction.
Couple smacks in wrong direction will make the process more difficult.
|
Not quite right, a roll pin is a cylinder of rolled spring steel and is NOT tapered and can be driven out from either end.
A tapered pin is just what it says, tapered piece of steel, and installed into a hole
created by a tapered reamer and can only be driven out from the small end.
Don't know which is used in the pedal cluster, but you need to know before you start
beating on it!