|
Registered
Join Date: Oct 2005
Location: Capistrano Beach, Ca.
Posts: 7,235
|
As mentioned, above, the wall will stiffen considerably once it is sheathed. Nailing a 3/16" or 1/4" plywood sheet to one side, nailing as if it's outer wall shear panel, will really hold down the wall. Add to that, screwed in drywall to the outside and, I assume, backer board/tile on the inside, and you will have a stable half-wall.
__________________
L.J.
Recovering Porsche-holic
Gave up trying to stay clean
Stabilized on a Pelican I.V. drip
Last edited by ossiblue; 02-08-2015 at 03:29 PM..
|