|
David
Thanks for the reply.
I have managed it now. I placed a wooden block under the transmission and lowered the engine gently till they broke away from each other. I was very carefull when lowering the engine, keeping my eye on the join untill they just came apart, I even left the nuts flush on the studs so that the engine/trans would only part by about 1/4". I had no problems after that, then it was a case of smaller and smaller blocks placed below the transmission as the engine was lowered, with a bit of jiggling and pulling on each occasion I lowered the engine.
Cheers
Tom
__________________
Tom
82 uprated 3.2L 911SC Coupe (Track Car)
|