Pedals are in and so is the E-brake handle.
Tremelune, the e-brake handle install was pretty straight forward. New heater cables go in from the tunnel and the e-brake cable from the rear of the car. Connect the cables to the handles and then bolt the handle in. Then go to the rear of the car and connect the cables and adjust accordingly.
I was done before I remembered to take pictures.
Today, I removed dents from my oil lines. Pretty cool process. I learned about it in this thread:
Fixed my Crushed Oil line for $5 and a beer.
Before
And After
Definitely not perfect but a heck of a lot better.
Tomorrow, I am going to work on repairing rust on the front fenders.
