[Groesbeck Hurricane]

I finally had time to work on the Porsche yesterday. I double checked all the oil and electrical connections. Replaced some fuses and did a once over. I have a borrowed video recorder so I verified that the clutch is moving the throw out arm. I primed the injectors and started her right on up. Everything appeared fine. I depressed the clutch pedal and heard a loud squealing.

Any ideas on what could be causing the squealing? Did I get the tension on the cable too tight or too loose? Is it possible I did not get the bottom of the fork in the channel so that the bottom of the plate is still partially connecting with the disk?

I verified the top of the fork was engaging, but could not see into the botom.