[blackduc238]

Phew!!
Installed the exhaust and pc3. Removed the canister. Fired up the bike. Few seconds in and oil pressure light comes on. Oh crap.
Shut down, check oil. Little low but not bad. Check fittings and look for leaks. Everything looks good. It was late so I go in and hunt the forum.
Lots of tossing and turning thinking about spun bearings and other bad things.
Went out to work on the bike today. Light still on. Checked the oil pressure sensor and sure enough there were a couple rubs with exposed wires. Re wrapped and fired her up Yippppy. Sweet sound of the laser and no oil light. Thank you pelican members for posting problems and solutions!!