|
Go-Kart Mozart
Join Date: Oct 2009
Location: Ole Miss by damn!
Posts: 1,380
|
I've added one similar to this to the driver's seat in my '86. IIRC the 964 seats are similar in that the center section can be lifted. Corbeau sells a bladder only, no foam model. Quote is from a response I made some time back in the technical forum. -J
Amazon.com: Core Products Small Inflatable Lumbar Cushion - Blue: Health & Personal Care
Quote:
I added lumbar to my stock seats. Love the stock seats but a previously herniated L5-S1 means I'm picky about my lumbar support. I found an inflatable lumbar support on Amazon and inserted it between the seat back springs and foam. Easier than it looks. On these seats the center section of the seat back is a separate piece and clipped to the side bolsters. You can separate the center section carefully for access. I cut the cover off a cheap three ring binder. The flexible plastic type just to have a backer for the lumbar support. Just seemed like that would be better than cloth and foam against the springs. Slid that and the support in from the side. Ran the tube that connects the inflation bulb out the rear corner and just let it lay in the rear footwell. If I want to make an adjustment I can easily reach back and find the bulb.
If I had to do it again I would locate a lumbar support that is just a bladder. Mine has foam wrapped around it and fully deflated may still be too much for some users. -J
__________________
|
__________________
86 Carrera
Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats.
H. L. Mencken
|