[Mitch Leland]

First off you can't get the bumper cover off until the bumperettes are removed. On lower face is a rubber door that will pop off if you put a flat blade screw driver in the detent and gently pry. Then you'll need an allan (I believe it's a 8mm) on a 6" extension. You'll have to feel around to engage the socket head bolt. Best is to start out with just the allan on the extension. Once you've engaged the socket head then attach the socket wrench. You only have to loosen the allan before removing the bumperette. Same going back, be sure the allan is started into the mounting bracket, then install the bumperette.