[icemann427]

I'm guessing you are still getting water? Is the pressure at the faucets, normal? Check/replace the gauge. If the pressure is low and/or the gauge is accurate, your ground water level may be low and your pump may be sucking some air, too; or, you may have a crack/leak in the pipe bringing water to ground level; or you may have a crack in the pipe serving the house. Look for water traces. Check valves are at ground level and hold the water from going back down the server pipe. That may cause your problem, but I'm unsure of that. The pump is normally set to stop and start at a certain water pressures, so once the set water pressure is reached, it would turn off, even if only for a few seconds if the check valve wasn't working. Is your pressure regulator working properly? The pump regulator on/off box may need to be replaced. Square D makes those. That is a start.