|
ok here is what I found...I drained 8.5 qts from the sump & oil filter...hummm
a few facts obtained:
1. after checking with many,many sources, the correct amt of oil is 9qts +/- 0.5 qt... again this is a gen 1, 997, c4s, 3.8L engine...
2. each gradation on the dash gage is 400ml = a tad less than 1/2 a qt...
so, has any one ever replaced the oil level/oil temp sensor before...?? what are the steps and what has to be removed to replace it...I believe it is located on the rt side(passenger side) btwn the starter and th eair pump per pelican wayne...but i cannot see it...so...does the intake have to come off which means the eng has to be dropped...??
as always, any & all input welcome...
thx, bob
__________________
I live for 911 tweaks...
|