|
Registered
Join Date: Oct 2001
Location: San Carlos, CA US
Posts: 5,562
|
You need to attach a DVM to the solenoid wire, have a helper crank the key over, and observe what voltage you have. If it is >10V, and no start, you have a bad starter. If it is less than 5V, you have a break in the wire. Very likely the 14 pin connector pin is bad or broken.
__________________
Porsche 2005 GT3, 2006 997S with bore-scoring
Exotic: Ferrari F360F1 TDF, Ferrari 328 GTS
Disposable Car: BMW 530xiT, 2008 Mini Cooper S
Two-wheel art: Ducati 907IE, Ducati 851
|