|
This is normal.
I find lots of trannies where the pivot has washers underneath to compensate for the machine work on the flywheel.
How do you get the pivot off? I use a 14 mm deep socket. I used a grinder to shave off enough material to allow the socket to enter the hole. If you don't wish to do this, use a visegrip, but wrap the pivot in some leather, so you don't score the ball.
I've seen as many as 2 washers used. Unfortunately, this is trial and error....
James
__________________
James
The pessimist complains about the wind; the optimist expects it to change; the engineer adjusts the sails.- William Arthur Ward (1921-1994)
Red-beard for President, 2020
|