[Toddau]

Step #12 refers to "Pop off the large metal cap that covers the outside of the inboard CV". I noticed that the kit referenced in this DIY (F-332-924-02) does not exist on Pelican anymore. I'm not sure on the correct kit to use? I purchased the kit number PEL-CV993B1 but it does not contain the large metal cap described in step 12...Is it okay to reuse the old caps?

Also, it looks like the hose clamps used in the PEL-CV993B1 kit are different from the normal CV boot clamps that would require the special CV Boot clamp pliers. Does this seem right?

Thanks guys!
Todd