|
1st the 944 bodied cars were not painted by Porsche !
they were built in the VW / audi plants .
to repair what your looking at is very ez to do .
personally I do not like pray can products at all but in this case they will be fine for this job .
you would spot in the bare metal area with some etch primer one or two light coats is all you want .
then let it dry and sand it lightly with a red scuff pad . wipe it off with a tack rag and then using transtar texcoat chip guard (spray can) spray on 2 or 3 coats and blend it out into the rest of the chip guard on the panel . (mask off the chip guard line on the fender )
let it dry then again sand it lightly with a red scuff pad and again wipe it with a tack cloth and the spray your body color .
the sharp edge of the chip guard on the panel you will want to feather edge out as you don't see it after your all done with the repair .
as for bed liner to use as chip guard is not a good idea at all !
the two products are totally different and made for different things . bed liner is a hard product and being such it doesn't take sand blasting from your wheels very well .
chip guard is a more rubbery product and is so for that reason .
|