Quote:
Originally Posted by scarceller
That's OK, do you possibly have anyone in your area with a 84-89 3.2L if so you can take your DME and put it in that other car to see if the problems move to the other car. I usually don't recommend the inverse, do not put a good DME in a questionable car. Where are you located?
Here's a thread I wrote up and shows bad joints and howto properly repair them. Even in the high res pics it's hard to tell those 3 are cracked:
http://forums.pelicanparts.com/porsche-911-technical-forum/652375-dme-bad-solder-joint-repair.html |
A friend of mine has a 84 Targa with a 85 3.2 Motronic swap in it that runs great. He thinks his DME is an 84 and has a 'jumper' soldered on and a Steve Wong chip. Is it worth a shot considering his runs correctly?
Thanks,
Mark