Solder issues are usually on the other bottom analog board. That top board never really has solder issues.
Quote:
Originally Posted by Dubbin'
Ok perfect, we will try that. my DME relay is new, it should not be an issue. I was swapping between the old and the new and there was no difference. I will also unplug the O2 sensor. I had unplugged it when I started trying to diagnose if it was culprit although I had not noticed any changes. I will also put the black coil back and keep the silver one as a spare.
I have a picture of my DME although it is not HD nor is it a close up... It's only of the outside/top side. I can't say that I really enjoy playing around in there.
Thanks,
Mark
 |