Quote:
Originally Posted by scarceller
I just watched the video again and in your 2nd gear runs the tach is accurate. In the stock 3.2L 2nd gear at 60MPH is right around 5800RPMs I can clearly see your tach and speedo match up. So I'd say the tach is accurate for that run.
WARNING PLEASE READ: Stop pulling WOT runs! You have no idea what your mixture is at at WOT, if you really have a air leak and the mixture leans more than >13.5AFR you are in very dangerous territory. You know something is wrong do not push that motor that hard any longer. You really need to find out what your mixture is at.
What about the O2 sensor, have you unplugged it yet? If not please do so now and see if anything changes.
|
I know... I'll stop... I hate this.... O2 is unplugged yes, did it when I re-installed black coil. I really pushed it to get it on video to show the hesitation - I stopped pushing it when it started hesitating a few months back. Did it when I re-installed black coil.
what should be my next step? check plugs? install a wideband?
Thanks,
Mark