[LummoxPG]

So I received the four fuel hoses I ordered from Roger at 928srus and was able to replace the 3 of the four lines and the fuel pressure regulator...and that has solved the "hot start" issue...great success...the only thing that kinda sucked beside lining up the two rear hoses with the regulator and the rear damper was that I was unable to use the short hose that roger sent that runs between the regulator and the damper as it was way too long and would tend to kink when in place. I noticed in the pic that accompanied the hose that the regulator and the damper were way further apart than in my car which are only about 4 inches apart. So I had to reuse my original hose....it looks ok, but it's not an ideal alternative. So I was wondering whether not to attempt to shorten the braided hose from 928rus or just send it back and build one myself from 8 bar hose...any thoughts?