|
Mechanic must have hands the size if catcher's mitts. I pulled both of mine recently in less then 2-minutes. Spray them with PB-Blaster and sit overnight. Gently twist them to work the corrosion loose. Spray more PB. Don't use Liquid Wrench, it's not as effective.
Also while the bellhousing was off to do clutch, it would've been easy to remove the bracket that holds them and dunk entire assembly into cleaner tank. Although that would require re-doing the sensor spacing when re-installing.
Last edited by DannoXYZ; 09-28-2015 at 06:02 PM..
|