|
Project Addicted
Join Date: Jul 2012
Location: Eastern Shore. MD
Posts: 919
|
The drifting to the floor is indicative of a bad master cylinder. The fluid is slowly bleeding by the seals under light pressure. The hard push makes a better seal to the bore because of the higher pressure pushes the seals out to the wall better.
The booster is just that, it helps with lowering effort but has nothing to dd with the hydraulics.
If there is no fluid coming out, I think you need another master.
__________________
Jon
1966 912
1976 911 3.4 Backdate Project
1986 944
|