Quote:
Originally Posted by Mick_D
it'll be pricey , the panel runs about 300 bucks or so and the welding will take at least r4 hours at whatever the welder says it'll cost. But it's the only way to fix this issue. If you can take out the glass it will save time and labor.
|
Restoration Design has the part for $285 but if your edges are good you could probably find someone to cut one out of a junker for a lot less. Try some of the Porsche dismantlers. And I bet you could find a Pelican in the Atlanta area that would weld it up for you for very little, if anything.