|
abit off center
Join Date: Feb 2002
Location: At the Airport Kentwood, MI
Posts: 7,311
|
You can also develop a ridge or wear pattern in both the adjuster foot and valve stem which makes setting them with a feeler gauge almost impossible because the gauge will ride on the ridges but when pulled out the valve and foot set back into the wear area, and it only takes a few thousands. That is why I like to use the 8x1.0 adjuster screw like a micrometer to set gap.
__________________
______________________
Craig
G2Performance
Twinplug, head work, case savers, rockers arms, etc.
|