Well, not really orders...but my wife recommended we get the seats and door cards done now, before Rob Budd decides to retire...or leaves Michigan for warmer climates and shipping cost become an issue. So, I will call Rob tomorrow and see if he can have us stop by.
Front seats out.
Hex head seat-bolts instead of allen head like my 84, much more tedious to remove. Had to grind down my favorite Snap On 10mm socket to get it in the slider rail, too, it had a shorter height than my cheapo socket...and socket height was an issue.
Rears removed.
Still firmly glued in place and much caution was used to not damage the inner foam cushion. There are also two phillips screws, each side, in the seat material along the rear hatch compartment edge.
Door cards out.
Very simple, remove inner door handle-lever guard, one screw, then slip your door panel tool around the plastic inserts, along top of door card, and pry gently until top portion comes free, then lift out of place.
Drivers side pile.
Passenger side pile.
Everything was pretty straight forward, removal, and found no surprises.
Brian.