View Single Post
cmonref cmonref is offline
Registered
 
Join Date: Jan 2000
Location: Richmond, VA USA
Posts: 1,058
Quote:
Second, when I went to locate the temperature sensor between my visors I found a hole in my headliner and two screws holding nothing but air.....so if you have an extra temp sensor laying around, I am in the market.
Yikes! The sensor part you need is NLA, and in years of watching, I have never seen anyone find one or seen one for sale in the classifieds.

In the hole in the headliner, is there a wire there with a connector on the end? That wire normally connects to the back of the sensor which is held in place by a rubber rectangle thingie held in place by the two screws. (See the pic below.) You can, if you are handy, install a thermistor of the right values and connect it to that wire, which will get your system functional. Without the right parts, you will have to figure out a way to mount your sensor.

The interior sensor is an NTC thermistor rated at 1.9kOhms at 20C/68F. Temp points above and below 20C/68F do not appear to matter much as long as the 20C/68F point is met.

Picture of the interior sensor:


Good luck.
Old 02-07-2016, 02:54 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #10 (permalink)